Description:
This In-line Flexographic Printing Press use flexo plate that is made from flexible rubber or photopolymer. And use low viscosity solvent, water-based or UV curable inks. The flexible (rubber or photopolymer) plates are mounted onto the printing cylinder with double-faced adhesive.
The printing unit of flexo press consists of following rollers:
- Ink Roller
- Anilox Roller
- Plate Cylinder
- Impression Cylinder
The Ink roller transfers the ink from an ink pan to the Anilox roller. The Anilox roller puts the ink to flexo plate that is mounted on plate cylinder. The material then moves between the plate cylinder and the impression cylinder.
The impression cylinder applies pressure to the plate cylinder, thereby transferring the image onto the material. The web, which by now has been printed, is fed into the overhead dryer so the ink is dry before it goes to the next print unit.
After the material has been printed with all colors, the web may be fed through an additional overhead tunnel dryer to remove most of the residual solvents or water. The finished product is then rerolled or is fed through the cutter.
Structure:
A. Unwind station
B. Front Auto. Web guide system
C. Corona system
D. In-feed tension system
E. Printing unit
F. Drying system (UV dryer or IR dryer)
G. Still image inspecting system
H. Out-feed tension system
I. Die cutting unit
J. Edge waste discharging system
K.Rewinding unit
L. Sheet Cutting system
M. Collection table with belt conveyor
N. Turn-bar
O. Lubricating system
P. Auto. Color register system
Q. Plate mouting machine
R. Anilox Roller Cleaing machine
The customer can choose the above structures according requirements.
Main technical data:
For wide web
|
Model
|
JQTYF33.5"
|
JQTYF 43.3"
|
JQTYF 50"
|
JQTYF 57"
|
JQTYF 65"
|
|
Printing Color
|
4 colors/6 colors/8 colors/10 colors/12 colors
|
|
Max.Web Width
|
850mm
|
1120mm
|
1300mm
|
1450mm
|
1650mm
|
|
Max.printing width
|
830mm
|
1100mm
|
1280mm
|
1430mm
|
1630mm
|
|
Max.Die-cutting width
|
830mm
|
1100mm
|
1280mm
|
1430mm
|
1630mm
|
|
Pringting Repeat
|
350--762mm
|
350--762mm
|
600--1280
|
600--1280
|
600--1280
|
|
Die-cutting Repeat
|
350--762mm
|
350--762mm
|
600--1280
|
600--1280
|
600--1280
|
|
Max.Unwinder Diameter
|
1524mm
|
1524mm
|
1524mm
|
1524mm
|
1524mm
|
|
Max.Rewinder Diameter
|
1524mm
|
|
Gearing
|
1/8cp
|
|
Max printing speed
|
150m/min
|
150m/min
|
150m/min
|
150m/min
|
150m/min
|
|
Diameter of web roller
|
100mm
|
100mm
|
100mm
|
100mm
|
100mm
|
|
Base motor power
|
15KW
|
15kw--22kw
|
22kw--30kw
|
22kw--30kw
|
22kw--30kw
|
|
Drying mode
|
a. Hot air Drying b.IR Drying c. UV Drying
|
|
Ink used
|
a. water-based ink b. UV ink
|
|
Power Requirement
|
380V 3PH 50Hz
|
|
Material
|
80--450g paper(copperplate paper, paperboard, kfraft paper), aluminium foil, plastic film, sthicker and all kinds of lamianted material
|
For narrow web
|
Model
|
JQTYF13”
|
JQTYF16.5”
|
JQTYF20.5”
|
JQTYF25.5”
|
|
Printing Color
|
4 colors/6 colors/8 colors/10 colors/12 colors
|
|
Max.Web Width
|
340 MM
|
430
|
|
|
|
Max.printing width
|
330 MM
|
420
|
|
|
|
Max.Die-cutting width
|
330 MM
|
420
|
|
|
|
Pringting Repeat
|
190-650 MM
|
|
Die-cutting Repeat
|
190-650 MM
|
|
Max.Unwinder Diameter
|
1067 MM
|
1524
|
|
Max.Rewinder Diameter
|
1067 MM
|
1524
|
|
Gearing
|
1/8 cp
|
|
Max printing speed
|
150 M/min.
|
|
Diameter of web roller
|
75 MM
|
|
Base motor power
|
11 KW
|
|
Drying mode
|
A. Hot air
B. IR
C. UV
|
|
Ink used
|
A. water-based ink
B. UV ink
|
|
Power Requirement
|
380 V, 50 HZ, 3 PH
|
|
Material
|
80--450g paper(copperplate paper, paperboard, kfraft paper), aluminium foil, plastic film, sthicker and all kinds of lamianted material
|
Special requirements accepted
SPECIFICATIONS ARE SUBJECT TO CHANGE FOR IMPROVEMENT WITHOUT ADVICE
|
